Research map / 3D vision / Face and shape
DensiCrafter: Physically-Constrained Generation and Fabrication of Self-Supporting Hollow Structures
Shengqi Dang, Fu Chai, Jiaxin Li, Chao Yuan, Wei Ye, Nan Cao
Read the paperCheck your idea against 137,217 papers
AI-extracted. The measured effects below were read by AI from the paper's full text (no summary yet). Numbers and claims can be wrong or missing context, so check the paper before you cite or build on it.
Measured effects reported in the paper
| What was changed | Where | Measured | Effect |
|---|---|---|---|
| add mass penalty L_mass (ablation) | DensiCrafter · Image-to-3D multi-view (150 Objaverse-XL objects) | mass / stability rate / rotation: 0.037 -> 0.035; 86.0% -> 87.3%; 13.17 -> 11.59 | Improved |
| add basal region B to the optimization domain (ablation) | DensiCrafter · Image-to-3D multi-view (150 Objaverse-XL objects) | stability rate / rotation: 74.7% -> 87.3%; 24.28 -> 11.59 | Improved |
| add centering loss L_center (ablation) | DensiCrafter · Image-to-3D multi-view (150 Objaverse-XL objects) | stability rate: 86.0% -> 87.3% | Improved |
| add region loss L_area (ablation) | DensiCrafter · Image-to-3D multi-view (150 Objaverse-XL objects) | stability rate / rotation: 76.7% -> 87.3%; 21.26 -> 11.59 | Improved |
| add height loss L_z (ablation) | DensiCrafter · Image-to-3D multi-view (150 Objaverse-XL objects) | mass: 0.030 -> 0.035 mass; 13.72 -> 11.59 rotation | Mixed |
| raise lambda_mass from 100 to 1000 (ablation) | DensiCrafter · Image-to-3D multi-view (150 Objaverse-XL objects) | rotation deviation / mass: 8.44 -> 13.86; mass 0.035 -> 0.031 | Hurt |
| increase basal thickness epsilon from 1 to 3 (ablation) | DensiCrafter · Image-to-3D multi-view (150 Objaverse-XL objects) | stability rate / mass: 72% -> 94% stable; mass 0.034 -> 0.041 | Mixed |
| add density smoothing (ablation) | DensiCrafter · Hollow structure quality | qualitative | Improved |
| add DensiCrafter to Trellis | DensiCrafter · Text-to-3D (150 prompts) | mass / stability rate: 0.214 -> 0.121; 84% -> 92.7% | Improved |
| add DensiCrafter to DSO | DensiCrafter · Image-to-3D single-view (150 Objaverse-XL objects) | stability rate / rotation: 91.3% -> 94%; 8.28 -> 5.64; mass 0.079 -> 0.057 | Improved |
| add DensiCrafter to Trellis | DensiCrafter · Image-to-3D single-view (150 Objaverse-XL objects) | stability rate: 68.0% -> 83.3% | Improved |
| add DensiCrafter to Trellis | DensiCrafter · Image-to-3D multi-view (150 Objaverse-XL objects) | stability rate: 71.3% -> 87.3% | Improved |
Earlier methods this paper compares with
Named baselines from earlier accepted papers in this paper's results tables: better than 0 of 1 on most shared results.
- Atlas3D — Atlas3D: Physically Constrained Self-Supporting Text-to-3D for Simulation and Fabrication (NeurIPS 2024) · better on 0 of 1 shared result
Matched by method name in results tables read by AI. Authors' own tables tend to favour the newer method, and a comparison can be missed when a method is renamed.
Closest papers by meaning
- Atlas3D: Physically Constrained Self-Supporting Text-to-3D for Simulation and Fabrication (NeurIPS 2024 · similarity 0.86)
- SILSA: Sliding-Window Slice Latents for Topology-Preserving High-Resolution 3D Generation (NeurIPS 2026 · similarity 0.86)
- CraftsMan3D: High-fidelity Mesh Generation with 3D Native Diffusion and Interactive Geometry Refiner (CVPR 2025 · similarity 0.85)
- GALA: Geometry-Aware Local Adaptive Grids for Detailed 3D Generation (ICLR 2025 · similarity 0.84)
- Tetrahedron Splatting for 3D Generation (NeurIPS 2024 · similarity 0.83)
- Volumetric Surfaces: Representing Fuzzy Geometries with Layered Meshes (CVPR 2025 · similarity 0.83)
Writing a paper in this area? scime draft is a free LaTeX editor with AI included, real-time co-authors and a check of your references and venue rules before you submit. It also imports OpenAI Prism projects.
