Research map / 3D vision / Depth and stereo
High Resolution, Deep Imaging Using Confocal Time-of-Flight Diffuse Optical Tomography
Yongyi Zhao, Ankit Raghuram, Hyun Koo Kim, Andreas H. Hielscher, Jacob T. Robinson, Ashok Veeraraghavan
Read the paperCheck your idea against 137,217 papers
AI-extracted. The measured effects below were read by AI from the paper's full text (no summary yet). Numbers and claims can be wrong or missing context, so check the paper before you cite or build on it.
Measured effects reported in the paper
| What was changed | Where | Measured | Effect |
|---|---|---|---|
| add time-binning (transient information) to DOT measurements (ablation) | DOT Jacobian · Simulated Jacobian conditioning | minimum singular value: 67 to 82 | Improved |
| restrict to confocal (collocated) source-detector pairs (ablation) | ToF-DOT · Simulated Jacobian conditioning | minimum singular value: 82 to 1276 | Improved |
| use confocal geometry with convolutional approximation instead of full source-detector pairs | ToF-DOT · Experimental 2D absorber reconstruction | inverse solver runtime: ~1 sec to ~8 ms | Improved |
| use 32x32 confocal scan instead of 10x10 all-pairs scan | ToF-DOT · Experimental 2D absorber reconstruction | scan points / image quality: 10,000 to 1024 scan points with comparable quality | Improved |
| add source multiplexing | CToF-DOT · Multiplexing experiment (5 mm phantom) | integration time for comparable PSNR: 100 ms to 10 ms, overall ~5 times reduction in capture time | Improved |
| add time-binning (time-gating) to fluorescence imaging (ablation) | CToF-DOT · Oval-line fluorescence scene | reconstruction quality | Improved |
| add time-domain data (CToF-DOT vs DOT with 4 mm separation, no temporal data) (ablation) | DOT · Simulated fluorescent line resolution test | spatial resolution: two 0.5 mm lines resolved | Improved |
| replace Jacobian forward model with convolutional forward model | 3D CToF-DOT reconstruction · Simulated 3D reconstruction | runtime: almost an order of magnitude faster, comparable image quality | Improved |
| add layer-wise (depth-dependent) regularization lambda(z) (ablation) | 3D FISTA reconstruction · Simulated 3D reconstruction | deep-layer recovery | Improved |
| multiplex up to 4 distant sources with no cross-talk | CToF-DOT · Prototype with 5 cm FOV | capture time: 4x improvement in total capture time | Improved |
Closest papers by meaning
- Single Exposure Quantitative Phase Imaging with a Conventional Microscope Using Diffusion Models (AAAI 2025 · similarity 0.83)
- Learnable Burst-Encodable Time-of-Flight Imaging for High-Fidelity Long-Distance Depth Sensing (NeurIPS 2025 · similarity 0.81)
- CD-RCM: Generalizable Continuous-Depth Novel View Synthesis for Reflectance Confocal Microscopy (NeurIPS 2026 · similarity 0.81)
- OpticalNet: An Optical Imaging Dataset and Benchmark Beyond the Diffraction Limit (CVPR 2025 · similarity 0.81)
- MicroDiffusion: Implicit Representation-Guided Diffusion for 3D Reconstruction from Limited 2D Microscopy Projections (CVPR 2024 · similarity 0.81)
- Separating the Wheat from the Chaff: Spatio-Temporal Transformer with View-interweaved Attention for Photon-Efficient Depth Sensing (AAAI 2025 · similarity 0.81)
Writing a paper in this area? scime draft is a free LaTeX editor with AI included, real-time co-authors and a check of your references and venue rules before you submit. It also imports OpenAI Prism projects.
